Sunday, 25 December 2016

How to Weave Mug Rugs


My love of the simple yet versatile rigid heddle loom just grows and grows. So when I saw a wee facebook post with a picture of some woven coasters I thought 'me too!'.  how could I have forgotten about making these?

So resolutions about completing UFOs in time for Christmas were abandoned.  I teach rigid heddle weaving a lot.  Twice a month or more and all levels.  So there are often bits of leftover warp. They are saved but not often used up.

So mug rugs help on two fronts:
1. By weaving mug rugs with the remaining warp it is not wasted.
2. Any bits that are cut off can be used for the weft, or actual weaving.

So all those loom leftovers (thrums) plus the ends from knitting projects and the bits of yarn people leave on my spinning wheels after spinning courses are incorporated into these coasters.  They tell a story!

How To Make Them
Use a 7.5 dent heddle ( 7.5 slots and holes to the inch/2.5cm.  If using leftover warp from a project that used a different sized heddle, replace the heddle and simply re-thread. I don't get too fussy about this project, it is just a bit of fun.

If the previous warp was wider, more than one rug can be woven at the same time.
Leave a few warps un threaded between each one and just throw them over the back of the loom.  10cm/4" sqaure is a good size for the coasters.  I hemstitched at the beginning and end.   Visist the Create With Fibre Community Facebook group to see my vidoe on hemstitching.

With a narrow project like this, there is no need to bother with shuttles.  Simply wind small amounts round your hand or work with smallish balls of yarn without even doing that.

To change colour, overlap the old with the new in the centre not at the edge as usual.
It took 2 hours to weave and hem stitch 6 coasters.




Sunday, 18 December 2016

A Crocheted Jacket to go with the Skirt



A Crocheted Jacket to go with skirt.
Finally!  Having handspun yarn for a skirt, I was thrilled with the handwoven, simple, above-the-knee skirt.  The yarn was spun from Hebridean fleece carded with all the leftover coloured bits from the workshops I teach.  There was not enough of the yarn left to crochet a jacket to go with it.  So having raked through my stash, I combined that yarn with some grey handspun alpaca and a commercially carded and handspun black Shetland/alpaca mix.  That yarn had been hanging about for a while, so it was a good plan.

Making the Jacket
The jacket was created by crocheted a chain long enough to go round my hips.  Then working UK double crochet (that’s single crochet if you are in the USA) one row of each colour in turn.  At the armholes I split it and crocheted the fronts then the back.  Joined the shoulders and went back to crochet the sleeves in the round , directly onto the garment. 

A tip for crocheted the sleeves of a garment without a pattern.
To make sure I got the two sleeves the same, not only did I write down what I did, but also crocheted the shaped part of one sleeve, then the shaped part of the other before finishing the bottom, straight section.  Just in case I put the project down for a while and forgot what to do.  It is of course possible to compare the two, but easy to end up one stitch out and end up with them different sizes.

Finishing
The jacket was finished by crocheting a wide band up the front in the grey alpaca.  Button holes were made a couple of rows from the finished edge. And then, a row of double crochet and one of crab stitch up the front, around the bottom edge and the sleeves.

Buttons
The buttons were made from some of the left over skirt fabric, and bring the outfit together nicely.  Button blanks 15mm size were bought on Amazon but you can do this round any button with a stem. 

Cut a circle somewhat wider than the button.  If using handwoven fabric, you may want to add an iron on backing to the fabric.  The one I used is a cotton one.  Stitch a running thread round the edge of the circle, then gather the stitching firmly around the stem of the button.   Phots are below so just scroll down a bit if you don't see them.

The Create With Fibre Community - our Facebook group - has lots of tips, chat and sharing.  Why not join us?

AND if you sign up for our newsletter you will get a free copy of Janet's article on sorting and washing fleece.  






Friday, 20 May 2016

crocheting the glenfinnan viaduct

It will take several months more to complete the Knit 1 Bike 1 artwork. The first exhibition will be Oct - Dec 2016 at the textile tower house hawick.

Today the Sunday Post newspaper came to photograph the crocheted Glenfinnan Viaduct though. It is not finished by a long shot but with a big push this week, all three sections and 21 arches will now stand up.  Have stuffed it, stiffened the legs with Paverpol and used alloy rods threaded through to get the curve.  The curve will be more accurate once it is attached to the base. It had to be in three sections that velcro together due to it being 12ft/4m long.   Now to crochet the base, some mountains and of course a train for the top.

Can you spot the knitted Brompton bicycle like the one i cycled round Scotland on?


Meanwhile the book will be out in a couple of weeks.

Friday, 29 April 2016

a handspun, handwoven skirt

There is something about creating your own clothes from scratch. I mean really from scratch. This handwoven skirt started life as a Hebridean rare breed fleece. Hebridean is the blackest of black in colour. The only fleece that is truly black as opposed to nearly black
 It is a double coated fleece with longer hair fibres and shorter fuzzy bits, making it interesting to spin. It also smells nicer than pretty much any other fleece so if you are a fibre sniffer it is for you!

So to begin with i carded the washed fleece with lots of coloured waste that was left over from workshops. I accumulate lots and always save it. Most was leftover ends of tops but there was a bit of silk too.  Spinning it long draw waa a breeze and made sure the bits did not work their way to the back of the rolag. It took me ages mainly because even at that stage it was scary to think of cutting the hand woven fabric. But eventually you just have to, unless you want to weave scarves and towels for ever.

The fabric was woven on a 24"/60cm  rigid heddle loom using a 12.5 dent heddle. This is the only loom you ever need in my opinion and i am passionate about them. I used a sewing pattern to cut the fabric but made up my own version of the pattern first, using an old sheet. and changing the size.  The lining is red satin.

 
 Cutting the fabric








Saturday, 26 March 2016

weaving in the English Lakes

So here i go again.  Teaching weaving at Hgham Hall Bassenthwaite Lake near Cockermouth. Having warped all ten looms on on Monday for the Catstrand course Hubby and i warped them all again for the Higham course. Well we didnt really need them all you understand but then i thought i may as well warp one for myself. And take a couple of spares in case of last minute bookings. And one as a demo for techniques...you get the picture. And it only takes a few minutes to warp one of these looms. So then i got an insatiable urge to weave some log cabin. Rigid heddle looms are mind boggling because just by warping in two colours you can create an almost infinite number of patterns. In fact just by weaving log cabin there is infinite variation. So i warped my larger rigid heddle loom at 10pm because all of the others now had a plain warp on them.

Monday, 21 March 2016

its easier to blog when you're not writing a book...

Well here i am again. The Knit 1 bike 1 book is finished. It has a lot more commas in it than i would like but is edited and all sqeaky clean. Hubby read it after the editor and pronouncec it a page turner! Publication date early May. 

I have almost caught up with everything since getting home from the bike ride and am doing lots of workshops. Pics from Edinburgh Yarn Festival where i taught five workshops last weekend. Awesome festival!